I fix maintain, install and repair many makes of traditional espresso, bean to cup machines and water boilers 

While some of the servicing I do has a fixed price due to the many makes and models of machines we are happy to chat and price according to the make and model of your machine that way I can me more accurate with any quote I give. Listed below are some of the servicing we carry out 

 

FRONT END SERVICE 

Ta Moko Espresso advise front end servicing of your equipment every 12 months. This service consists of replacing:

·         Group Head Seals

·         Group Head Gaskets

·         Group Head Shower Plates

·         Back Flushing Of The Group Head Itself

·         Adjust Grinder / Reset Drink Settings If Necessary

·         Basic Retrain Of Staff If Required

·         Advise On General Condition Of The Machine And Parts & Recommend Future Replacements

 

 INTERMEDIATE  MACHINE SERVICE 

 Ta Moko Espresso advise this service is to be carried out at least every 18 – 24 months. Full Machine Servicing Includes:

·         Group Head Seals

·         Group Head Gaskets

·         Group Head Shower Plates

·         Adjust Grinder / Reset Drink Settings If Necessary

·         Back Flushing / Cleaning Of The Group Head Itself

·         Steam Arm Seals

·         Water Valve Seals

·         Minor Scale Removal & Clean Water Ports

·         Minor Scale Removal & Clean Internal Filters

·         Advise On Condition of the Machine & Advise Of Any Issues With Parts & Recommend Future Replacements

·         Drink Settings Re-Calibration

·         Basic Re-train of Staff If Required

 

MAJOR SERVICE

Recommended for any machine never serviced, or left sometime between services, always recommended for second hand equipment, or older equipment. This is done off site with and takes between (10-20 Days) as the machine is stripped back to parts de scaled cleaned and then reassembled and a loan machine is supplied so you will not be without coffee

·         Full Internal Descale – Including Boiler

·         Group Head Seals

·         Group Head Gaskets

·         Steam Arm Seals

·         Water Valve Seals

·         Group Head Shower Plates

·         Anti-Vac Valves

·         Back Flushing Of The Group Head Itself

·         Adjust Grinder / Reset Drink Settings If Necessary

·         Advise On Condition Of The Machine And Parts & Recommend Future Replacements

·         Scale Removal & Clean Water Ports

·         Scale Removal & Clean Internal Filters

·         Boiler Pressure Safety Valve (Certified)

·         Replace Worn Valve Rubbers

·         Drink Settings Re-Calibration

 

Pressure Test and Certification

If you are a Coffee shop / Pub / Restaurant/outside catering company or any commercial business who uses a coffee machine? Then are you compliant with the Pressure Systems Safety Regulations 2000. If not then you should read the following publication from the HSE: http://www.hse.gov.uk/pubns/indg261.pdf.

It is a criminal offense not to comply with the current regulations and you can face unlimited fines from the HSE

Ta Moko Espresso can help make sure you get it right. I am an espresso machine engineer who has completed the I.O.S.H approved and validated Pressure Systems Safety course delivered by Coffee Safe and I am able to carry out an inspection on your coffee/espresso machines or water/steam boilers and issue a certificate of compliance with the Pressure Systems Safety Regulations 2000.